The Resolute Man Finds a Way free essay sample

There are few events more conducive to making a 14 year old boy have an anxiety attack than putting him on a pitcher’s mound in a game in front of 30 of his very attractive female peers. I learned this lesson the hard way during my first 9th grade high school baseball game, pitching poorly and getting pulled from the game just an inning into the contest. Unfortunately, my first poor showing turned into a string of losses that eventually led to me getting cut from the team after the season. Feeling extremely depressed and discouraged after losing my spot on the team, I began to wonder where my place in the sport, and ultimately in life, was. My infatuation with baseball started off as nothing more than a way for me to make friends in a new community but eventually grew into something much more: a love affair that consumed my life, created my identity, and served as a physical outlet for my mental and emotional unrest. We will write a custom essay sample on The Resolute Man Finds a Way or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page I knew that if I didn’t want to lose my first true love I’d have to extend my playing days beyond the high school field, where I was no longer given a chance, and into the collegiate arena. Thus, I developed a rigorous and meticulous plan to somehow earn an offer to play college baseball. The cold, iron weight room forged out an indifference to pain that helped me push through obstacles that I never thought possible. Running at the track at night forced me to focus on the next step, always striving to give 100% as I legged out the last few yards of a sprint. My favorite part of training would be long-tossing in the 300 yard open field behind my school. Over the months my high-arcing, maximum effort tosses stretched farther and farther, representing the progress I was making as both a pitcher and person as I tossed aside people’s assumptions about my skills and broke through new plateaus of confidence and skill. After a few years and many long days of practice, I found myself back on the mound in the position I had coveted for months: a showcase where I had the chance to perform in front of 100 college coaches and finally prove myself. Digging deep and utilizing all of the skills I had gained over the past few years, I gave up no runs and stuck out 3 in my two innings of work. At the end of the day, I had 6 college offers from high academic schools and was the happiest kid in the world. No matter what future games I pitch, win or lose, there will never be one more important than the metaphorical one that I’ve played against myself these past few years, one where I can say that I’m stepping off the mound with a label I’ve proudly created for myself: I am a winner, and that is a distinction which can never be taken from me.

Teacher Merit Pay Benefits and Disadvantages

Teacher Merit Pay Benefits and Disadvantages Teaching unions around the United States are lessening their opposition to merit pay for teachers and finding new ways to experiment with the concept, passionate reactions erupted from teachers everywhere. So, what exactly are the pros and cons of paying teachers differently based on the results they produce in the classroom? The issue is complex. In fact, it has been debated for over 40 years in the world of education. The National Education Association (NEA) adamantly opposes merit pay, but is it an idea whose time has come? The Pros Americans value hard work and results, and our capitalist system hinges upon rewarding such results. Most professions offer bonuses and salary increases to exemplary employees. Why should teaching be the exception? The fact that a sloppy teacher and a dedicated teacher earn the same salary just doesn’t sit right with most people.Incentivized teachers will work harder and produce better results. What motivation do teachers currently have to go above and beyond the jobs basic requirements? The simple possibility of extra cash would most likely translate into smarter teaching and better results for our children.Merit Pay programs will help recruit and retain the nation’s brightest minds. It’s the odd teacher who hasn’t considered leaving the classroom and entering the corporate workplace for the twin benefits of less hassle and more money potential. Particularly intelligent and effective teachers might reconsider leaving the profession if they felt that their extraordinary efforts were being recognized in their paychecks. Teachers are already underpaid. Merit Pay would help address this injustice. Teaching is due for a renaissance of respect in this country. How better to reflect the esteemed way we feel about educators than through paying them more? And the highest performing teachers should be first in line for this financial recognition.We are in the middle of a teaching shortage. Merit pay would inspire potential teachers to give the profession more consideration as a viable career choice, rather than a personal sacrifice for the higher good. By tying teaching salaries to performance, the profession would look more modern and credible, thus attracting young college graduates to the classroom.With American schools in crisis, shouldn’t we be open to trying almost anything new in the hopes of making a change? If the old ways of running schools and motivating teachers aren’t working, perhaps it’s time to think outside of the box and try Merit Pay. In a time of crisis, no valid ide as should be quickly denied as a possible solution. The Cons Virtually everyone agrees that designing and monitoring a Merit Pay program would be a bureaucratic nightmare of almost epic proportions. Many major questions would have to be adequately answered before educators could even consider implementing Merit Pay for teachers. Such deliberations would inevitably take away from our real goal which is to focus on the students and give them the best education possible.Goodwill and cooperation among teachers will be compromised. In places that have previously tried variations of Merit Pay, the results have often been unpleasant and counter-productive competition between teachers. Where teachers once worked as a team and shared solutions cooperatively, Merit Pay can make teachers adopt a more â€Å"I’m out for myself only† attitude. This would be disastrous for our students, no doubt.Success is difficult, if not impossible, to define and measure. No Child Left Behind (NCLB) has already proven how the various unleveled playing fields in the American education system inherently set up a wide variety of standards and expectations. Consider the diverse needs of English Language Learners, Special Education Students, and low-income neighborhoods, and you’ll see why it would be opening a messy can of worms to define standards of success for American schools when the stakes are cash in the pockets of real teachers. Opponents to Merit Pay argue that a better solution to the current educational crisis is to pay all teachers more. Rather than design and regulate a messy Merit Pay program, why not simply pay teachers what they are already worth?High-stakes Merit Pay systems would inevitably encourage dishonesty and corruption. Educators would be financially motivated to lie about testing and results. Teachers might have legitimate suspicions of principal favoritism. Complaints and lawsuits would abound. Again, all of these messy morality issues serve only to distract from the needs of our students who simply need our energies and attention to learn to read and succeed in the world.​ So what do you think now? With issues as complicated and evocative as Merit Pay, ones position can be naturally nuanced. In the big picture, all that really matters is the learning that happens with our students when the rubber meets the road in our classrooms. After all, theres not a teacher in the world who entered the profession for the money. Edited By:  Janelle Cox

Frequency Response of Netwroks (Electronic Engineering) Lab Report

Frequency Response of Netwroks (Electronic Engineering) - Lab Report Example Current was determined by monitoring the voltage across 100 ? resistor. The CRO was used to record the current and voltage waveforms. The above procedure was repeated for the series connection of a resistor and inductor. Voltage across the inductor was measured at 100 Hz. The frequency response of the RC low-pass filter was measured over the frequency range 100 Hz to 100 kHz. At R = 1 k?, C = 0.01 Â µF, the attenuation at 15 to 20 frequencies were logarithmically recorded over this range. This procedure was repeated with R= 10 k?. The LF oscillator was connected to the RLC series circuit and with R=100 ? the voltage across the capacitor and inductor, and current through the circuit at frequencies between 1 kHz and 100 kHz determined by measuring the voltage across the series resistor. The band-pass filter circuit was constructed and voltages Vo and Vi measured over the range of frequencies 1kHz to 100 kHz. The band-stop filter circuit was also constructed and Vo and Vi again measure d over the range of frequencies 1kHz to 100kHz. A Twin-T filter was then constructed with R1 = R2 = 100 ? and C1=C2=0.01Â µF. ... 1000 4.673 0.301 0.00301 1552.492 0.000644 2000 4.627 0.561 0.00561 824.7772 0.001212 3000 4.551 0.83 0.0083 548.3133 0.001824 4000 4.47 1.093 0.01093 408.9661 0.002445 5000 4.37 1.32 0.0132 331.0606 0.003021 6000 4.253 1.596 0.01596 266.4787 0.003753 7000 4.11 1.802 0.01802 228.0799 0.004384 8000 3.962 1.989 0.01989 199.1956 0.00502 9000 3.84 2.123 0.02123 180.8761 0.005529 10000 3.701 2.268 0.02268 163.1834 0.006128 Figure1 The capacitance is the gradient of the line which is 6?10-4 F By calculation C= 1/2?f Xc and at f =10000 Hz and Xc =163.1834 ? then, C = 1 / 2*?*10000*163.1834 = 0.4126 F which reasonably agrees with the experimental values. The small difference between the calculated value and the measured value may be due to inaccurate readings or as a result of rounded figures. 2) Measuring VL and VR in figure6 with R=100 ? and C=0.01uf Table.2 ? (Hz) VL (v) VR (V) I (A) XL (?) 1/XL 100 1.443 4.379 0.04379 32.95273 0.030347 1000 0.675 4.36 0.0436 15.48165 0.064593 2000 1.299 4.23 0.0423 30.70922 0.032564 3000 1.867 4.028 0.04028 46.35055 0.021575 4000 2.317 3.791 0.03791 61.11844 0.016362 5000 2.709 3.53 0.0353 76.74221 0.013031 6000 3.033 3.273 0.03273 92.66728 0.010791 7000 3.273 2.907 0.02907 112.5903 0.008882 8000 3.328 2.705 0.02705 123.0314 0.008128 9000 3.488 2.496 0.02496 139.7436 0.007156 10000 3.592 2.32 0.0232 154.8276 0.006459 Figure 2 From the gradient, the inductance obtained to be 15.6 mH The inductive reactance XL at 100Hz is XL=2fL=2?3.14?100?15.6?10-3= 9.8 ? At f = 100 Hz from the table above XL = 32.95273 ? The difference is due to experimental errors and errors in reading of results. 3) Measuring Vo , Vi , the gain and calculating the frequency response Table.3 ? (HZ) Vi (V) VO (V) Gain Gain in dBs 100 4.634 4.638 1.000863 0.007494 160

Multinational Enterprises In Asian Development Case Study

Multinational Enterprises In Asian Development - Case Study Example The research will review the trends and expansionist strategies employed by multinational enterprises from these nations and evaluate how they managed to attain successes on the global level. Japanese Businesses The Japanese European Trade Organisation (JETRO) studied a number of things about the expansion if Japanese businesses into Europe (Sachwald, 1995). They identified five main motives for the expansion of Japanese businesses into Europe. First of all, Japanese businesses seeking to expand into Europe for production reasons. Geographically, Japan has not been a very rich island in terms of natural resources. As such, their expansionist drives into foreign nations included the desire to acquire much needed raw materials. Thus, the establishment of foreign companies enabled them to establish production systems with their technology and capital and produce at points close to the customers that they previously exported to. Secondly, the cost of energy and electricity has been tradi tionally high. Japanese expansionist ideology was to make use of cheap electricity and energy costs. Again, Japan has always been an overpopulated island. Due to that, land costs are generally higher. The expansion into foreign lands enabled Japanese businesses to economize and save significantly on rent. Other costs like pollution and transport costs were significantly lower in other parts of the world. Thus, Japanese businesses expanded to foreign lands to take advantage of these production-related advantages. Secondly, Japanese businesses moved to different parts of the world in order to develop new markets. In the 1970s, Japanese businesses had exported large volumes of products to people in different parts of the world.

Alzeimer's Disease Research Paper Example | Topics and Well Written Essays - 250 words

Alzeimer's Disease - Research Paper Example Alzheimer’s disease, also known as Senile Dementia of the Alzheimer Type is a brain complication, which results in deteriorated brain functionality (American Health Assistance Foundation, 2011). It is the most reported case of dementia complication and develops gradually in a victim. The main effects of the disease are a permanent damage on neurons, which leads to intellectual incapacitation through loss of memory and rationality. As the disease develops in a person, it impairs brain related functionality leading to poor judgment and rationale in making decisions (Nordqvist, 2009), (American Health Assistance Foundation, 2011) The two major causes of Alzheimer’s disease are family history and age (Crystal, n.d.). Although developing Alzheimer’s disease is not a part of normal aging (Crystal, n.d.), it has been proven that age increases the risk of developing this disease (Crystal, n.d.). Family history also plays a major role in Alzheimer’s disease and having a close blood relative such as mother, sister, a brother; etc who has developed Alzheimer’s disease increases the risk of developing this disease. Other unproven causes of this disease include a history of head trauma, long-standing high blood pressure, and female gender (Nordqvist, 2009). There are two major types of Alzheimer’s disease, which have been identified according to the age of the patients: Early Onset Alzheimer’s not very common and is said to occur when a patient displays symptoms of the disease before reaching the age of 60 (Kantor, 2010). Late Onset Alzheimer’s is however very common and is said to occur when a patient aged 60 years or higher displays symptoms of the disease. The two types are both fatal (Kantor, 2010). The basic symptoms of Alzheimer’s disease are language and memory problems (forgetting familiar names, words, routes etc), flat moods, and personality changes (Kantor, 2010). A more in-depth discussion about the

Value Package Introduction in COS

Value Package Introduction in COS Abstract VPI (Value Package Introduction) was one of the core programs in Cummins Operating System (COS). VPI was the process by which the Company defined, designed, developed and introduced high quality Value Packages for customers. One of the key processes in a VPI program was to identify part failures. When a part failure was identified, it was transported to other plant locations. A delay in delivery time from one plant location to another impeded the diagnosis of a part and resulted in a postponement of a critical resolution and subsequent validation. As a proven methodology, customer focused Six Sigma tools were utilized for this project to quantify the performance of this process. Six Sigma was a data-driven approach which was designed to eliminate defects in the process. The project goal was to identify root causes of process variation and reduce the number of days it was taking for a part to move from point of failure to the component engineer for evaluation. The average number of da ys at the start of this project was 137. The goal was to reduce this by 50%. The benefits of performing this project was a reduction in the time it takes for parts to move which impacted the ability to analyze and fix problems in a timely manner and allowed the part to be improved or modified and put back on the engine for further testing. VPI Failed Parts Movement Between Locations Introduction VPI (Value Package Introduction) was one of the core programs in Cummins Operating System (COS). VPI was the process by which the Company defined, designed, developed and introduced high quality Value Packages for customers. The complete VPI package allowed Cummins to continuously improve the product(s) delivered to customers. This project was conducted in an effort to increase the value of these packages. By improving the process of moving parts from one location to another, Cummins has benefited in both cycle time and cost. VPI included all the elements of products which involved services and information that was delivered to the end-user customer. These products included: oil, filters, generator sets, parts, business management tools/software, engines, electronic features and controls, service tools, reliability, durability, packaging, safety and environmental compliance, appearance, operator friendliness, integration in the application, robust design, leak-proof components, ease of service and maintenance, fuel economy, rebuild cost, price, and diagnostic software. These were key factors of customer satisfaction that allowed Cummins to remain competitive and provide quality parts and services to the end customers. This process was essential in surviving among competitors. Statement of the Problem One of the key processes in a VPI program was to identify and resolve part failures. In order to do this in a timely manner, parts needed to travel quickly from the point of failure to the component engineers for diagnosis. Failures were identified at Cummins Technical Center during engine testing. The failed parts were then sent to one of two other locations, Cummins Engine Plant (Cummins Emission Solutions) or the Fuel Systems Plant, where they were to be delivered to the appropriate engineer for diagnosis and part engineering changes. A delay in the diagnosis of a failed part meant a delay in the resolution of the problem and subsequent engine testing. The ideal situation was for a part failure to be identified by the test cell technician, delivered to the engineer, diagnosed by the engineer, and the part redesigned for further testing on the engine. When this did not occur timely, the failed part did not reach the engine again for a sufficient amount of testing. The problem was that parts were either taking a very long time to get into the engineers hands, or the parts were lost. Engines require a pre-determined amount of testing time to identify potential engine failures and associated risks to the customer and the Company. As a result, the opportunity to continually improve parts and processes was missed. Through the use of customer focused six sigma tools this process improved the ability to solve customer problems and achieve company targets. Investigation was required to determine the most efficient process for the transfer of failed parts between different sites within Cummins. Significance of the Problem This process was important in solving part failures. Timely transfer of parts to the correct engineer for analysis reduced the amount of time for issue correction and improved the performance of the engines that were sold to customers. This package allowed Cummins to continuously improve the process and reduce cycle time and cost. This project involved the transportation of VPI failed parts from the point of failure to the appropriate component engineer. The improvements made during this project ensured that parts were received by the engineers in a timely manner which allowed further testing of the re-engineered failed parts. Statement of the Purpose The process of identifying part failures and delivering them to the appropriate component engineer was essential in diagnosing problems and correcting them. Personnel were either not trained in the problem identification area or were unaware of the impact that their work had on the entire process. Communication between the test cell engineers whom identify part failures was important within two areas. First, it was critical that the engineer responsible for the part was notified and secondly, the Failed Parts Analyst (FPA) had to be notified in order to know when to pick up the part for shipping. The partnership between the test cell engineer and the other two areas was a fundamental part of this process in order for it to be successful. Other factors that contributed to the time delay in part failure identification and delivery time was vacation coverage of key employees and training of shipping and delivery personnel. The average number of days for a part to be removed from the tes t cell engine and delivered to the appropriate design engineer was 137 days. Based on the logistics of the locations where the parts were being delivered, this process was improved to be accomplished in less time. The purpose of this project was to reduce the amount of time it was taking for this process to occur. The benefits of performing this project resulted in a reduction in the time it was taking for parts to move which impacted the ability to analyze and fix problems and allowed the part to be improved or modified and put back on the engine for further testing. The improvements derived from this project can be applied to similar processes throughout the multiple business units. Definition of Terms VPI- Value Package Introduction was a program utilized by Cummins in which new products were introduced. It included all the elements of creating a new product such as design, engineering, final product production, etc. COS- Cummins Operating System; the system of Cummins operations which were standard throughout the Company. It identified the manner in which Cummins operated. CE matrix tool that was used to prioritize input variables against customer requirements. FPA- Failed Parts Analyst ; the FPA was the person responsible for retrieving failed parts from the test cells, determining the correct engineer to whom these failed parts were to be delivered to, and prepared the parts for shipping to the appropriate location. SPC- Statistical Process Control; SPC was an application of statistical methods utilized in the monitoring and control of the process. TBE- Time Between Events; In the context of this paper, TBE represented the number of opportunities that a failure had of occurring between daily runs. McParts- Software application program which tracked component progress through the system. It provided a time line from the time a part was entered into the system until it was closed out. Assumptions The assumption was made that all participants in the project were experienced with the software application program that was utilized. Delimitations Only failed parts associated with the Value Package Introduction program were included in the scope of this project. Additionally, only the heavy duty engine family was incorporated. The light duty diesel and mid-range engine families were excluded. This project encompassed three locations in Southern Indiana. The focus of this project was on delivery time and did not include packaging issues. It also focused on transportation and excluded database functionality. Veteran employees were selected for collecting data. The variable of interest considered was delivery time. Data collection techniques were limited to first shift only. The project focusd on redesigning an existing process and did not include the possibility of developing a new theory. Limitations The methodology used for this project did not include automation of the process as a step. RFID was a more attractive way to resolve this problem; however, it was not economically feasible at the time. The population was limited since the parts that were observed were limited to heavy duty engines which reduced variations in the size and volume of parts. Time constraints and resource availability was an issue. Due to team members residing at several locations, meeting scheduling was more problematic. Additionally, coordinating team meetings was a challenge because room availability was limited. Review of Literature Introduction The scope of this literature review was intended to evaluate articles on failed parts within Value Package Introduction (VPI) programs. However, although quality design for customers is widely utilized, the literature on Value Package Introduction was rather scarce. VPI was a business process that companies used to define, design, develop, and introduce high quality packages for customers. VPI included all the elements of products which involved services and information that was delivered to the end-user customer. One of the key processes in a VPI program was to problem -solve part failures, which was the direction this literature review traveled. Methods This literature review focused on part/process failures and improvements. The methods used in gathering reading materials for this literature review involved the use of the Purdue University libraries: Academic Search Premier, Readers Guide, and Omni file FT Mega library. Supplementary investigation was conducted on-line where many resources and leads to reference material were found. All of the references cited are from 2005 to present with the exception of a Chrysler article dated 2004 which was an interesting reference discussing the use of third party logistic centers, a journal article from 1991 that explains the term, cost of quality, which is used throughout this literature review, and two reference manuals published by AIAG which contain regulations for ISO 9001:2000 and the TS16949 standards. Keywords used during researching included terms such as scrap, rework, failed parts and logistics. Literature Review Benchmarking. Two articles, authored by Haftl (2007), concentrated on the mixture of metrics needed to optimize overall performance. Some of these metrics included completion rates, scrap and rework, machine uptime, machine cycle time and first pass percentages. â€Å"According to the 2006 American Machinist Benchmarking survey, leading machine shops in the United States are producing, on average, more than four times the number of units produced by other non-benchmarked shops. Also worth noting is that they also reduced the cost of scrap and rework more than four times.† (Haft, 2007, p.28). The benchmark shops showed greater improvement than other machine shops. â€Å"The benchmark shops cut scrap and rework costs to 4.6 percent of sales in 2006 from 6.6 percent three years ago, and all other shops went to 7.8 percent of their sales in 2006 from 9.3 percent three years ago† (Haftl, 2007, p.28). The successful reduction of scrap and rework costs by the benchmark shops w ere contributed to several factors. First, training was provided to employees and leadership seminars were held. Secondly, these shops practiced lean manufacturing and lastly, they had specific programs which directly addressed scrap and rework. Whirlpool, one of the nations leading manufacturers of household appliances, had used benchmarking as a means of finding out how they rated in comparison to their competitors. They benchmarked their primary competitor, General Electric. As a result, they discovered what improvements they could make that could be managed at a low investment. The improvement processes were especially useful and applied in existing strengths of the company. They rolled out a new sales and operating plan based on customer requirements (Trebilcock, 2004). Quality. An overall theme contained in all of the articles reviewed was that of quality. In Staffs review (2008), hecontended that regardless of a companys size, quality was critical in maintaining a competitive advantage and retaining customers. The Quality Leadership 100 is a list of the top 100 manufacturers who demonstrated excellence in operations. The results were based on criteria such as scrap and rework as a percentage of sales, warranty costs, rejected parts per million, the contribution of quality to profitability, and share holder value. Over 800 manufacturers participated in this survey. The top three manufacturers for 2008 were listed as: #1 Advanced Instrument Development, Inc. located in Melrose Park, IL, #2 Toyota Motor Manufacturing in Georgetown, KY., and Utillmaster Corp. Wakarusa, IN. (Staff, 2008). In an article written by Cokins (2006) the author stressed that quality was an important factor in improving profitability. He informed the reader that quality manage ment techniques assisted in identifying waste and generating problem solving approaches. One of the problems he cited regarding quality was that it was not often measured with the appropriate measuring tools. As a result, organizations could not easily quantify the benefits in financial terms. Obstacles that affected quality was the use of traditional accounting practices. The financial data was not captured in a format that could easily be applied in decision making. Because quantifiable measures lacked a price base to compare the benefits, management often perceived process improvements as being risky. Cost of Quality (COQ), was the cost associated with identifying, avoiding and making corrections to defects and errors. It represented the difference between actual costs and reduced costs as a result of identifying and fixing defects or errors. In Chens report (ChenAdam,1991), the authors continued to breakdown cost of quality into two parts, the cost of control and the cost of failure. They explained that cost of control was the most easily quantifiable because it included prevention and measures to keep defects from occurring. Cost of control had the capability to detect defects before a product was shipped to a customer. Control costs included inspection, quality control labor costs and inspection equipment costs. Costs of failure included internal and external failures and were harder to calculate. Internal failures resulted in scrap and rework, while external failures, resulted in warranty claims, liability and hidden costs such as loss of customers (ChenAdam, 1991). Because co st of control and cost of failure were related, managing these two element reduced part failures and lowered the costs associated with scrap and rework. Tsarouhas (2009, p.551) reiterated in his article on engineering and system safety , that â€Å"failures arising from human errors and raw material components account for 25.06% and 5.35%, respectively, which is about 1/3 of all failures†¦.†. â€Å"A rule of thumb is that the nearer the failure is to the end-user, the more expensive it is to correct† (Cokins, 2006, p. 47). Identification of failed parts was a key process of Value Package Introduction and key to identifying and correcting failures before they reached the customer. A delay in the diagnosis of a defective part resulted in the delay or a miss to the implementation of a critical fix and subsequent validation. When a delay occurred, the opportunity to continually improve parts and processes was not achieved. In a journal article written by Savage Son ( 2009), the authors affirmed that effective design relied on quality and reliability. Quality, they lamented, was the adherence to specifications required by the customer. Dependability of a process included mechanical reliability (hard failures) and performance reliability (soft failures). These two types of failures occurred when performance measures failed to meet critical specifications (Savage Son, 2009). Tools and specifications. The remaining articles discussed in this literature review focused on tools and specification that were utilized across the business environment. Specifications were important aspects of fulfilling a customers needs. Every company had its own unique way of operating, so businesses often had slightly different needs (Smith, Munro Bowen, 2004, p. 225). There were a number of tools that were available to help meet specific customer requirements. Quality control systems and identification of failed parts were among these tools. The application of statistical methods was used to make efforts at improvement more effective. Two common statistical methods that were used are those that were associated with statistical process control and process capability analysis. The goal of a process control system was to make predictions about the current and future state of a process. A process was said to be operating in statistical control when the only sources of variation were common causes (Down, Cvetkovski, Kerkstra Benham, 2005, p. 19). Common causes referred to sources of variation that over time produced a stable and repeatable distribution. When common causes yielded stable results then the output was considered to be predictable. SPC involved the use of control charts though an integrated software package. In an article by Douglas Fair (2008), he viewed product defects from the eyes of the consumer. He stated that to truly leverage SPC to create a competitive advantage, key characteristics had to be identified and monitored. (Fair, 2008) The means for monitoring some of these characteristics involved the use of control charts. An article written on integrated control charts, introduced control charts based on time-between-events (TBE).These charts were used in manufacturing companies to gauge the reliability of parts and service related applications. An event was defined as an occurrence of a defect and time referred to the amount of time bet ween the occurrence of defect events (Shamsuzzaman, Min, Ngee Haiyun, 2008). Process capability was determined by the variation that came from common causes. It represented the best performance of a process. Other writers deemed that one way to improve quality and achieve the best performance was to reduce product deviation. The parameters they used included the process mean and production run times (Tahera, Chan Ibrahim, 2007). Peter Roost (2007) favored the use of Computer-Aided Manufacturing tools as a means of improving quality. According to the author, CAM allowed a company to eliminate errors that cause rework and scrap, improved delivery times and simplified operations, and identified bottlenecks which assisted in efficient use of equipment (Roost, 2007). Other articles on optimization introduced a lot size modeling technique to identify defective products. Lot-sizing emphasized the number of units of an item that could be produced without interruption on the machinery used in the production process (Buscher Lindner, 2007). Conclusion In this literature review the importance of failed part identification was presented. The impact that quality and reliability had on this process was indicative of the value that proper measuring tools provide. Through the use of customer focused tools the identification and correction of failed parts was more easily accomplished and allowed a quicker resolution to customer problems. Benchmarking was discussed as a means of comparing outputs to those of competitors. Benchmarking was the first step in identifying areas requiring immediate attention. Haftl ( 2007) and Trebilcock (2004) devoted their articles to benchmarking and the impact it had on identifying areas demanding immediate improvement processes. Staff (2008), Cokins (2006), Tsarouhas (2009), and Savage Son (2009) spent more time discussing the critical requirement of quality and the affects it had on competitive advantage. Lastly, authors Smith, Munro Bowen (2004), Down (2005), Cvetkovski, Kerkstra Benham (2005), Fair ( 2008), Tahera, Chan Ibrahim (2007), and Roost (2007) discussed the different specifications and tools used in improving quality and identifying failures. The articles involving benchmarking were concise and easy to understand. A similarity among all of the articles is the census that quality was important in identifying and preventing failures and that competitive advantage cannot be obtained without it. Gaps identified through this literature review were the methods of making process improvements. Several of the authors had their own version of the best practice to use to improve performance. The articles on tools and specifications were very technical and discussed the different methods. In Fairs article,the author had a different perspective than any of the other articles reviewed. He wrote from the view of a consumer. Methodology This project built on existing research. Documentation was reviewed to determine the methodology used in previous process designs. The purpose of this project was to redesign the process flow to improve capability and eliminate non-value added time. Team members were selected based on their vested interest in the project. Each team member was a key stakeholder in the actual process. A random sampling technique was in which various components were tracked from point of failure to delivery. McParts, a software application program, was utilized to measure the amount of time that a component resided in any one area. Direct observation was also incorporated. A quantitative descriptive study was utilized in which numerical data was collected. The DMAIC method of Six Sigma was used. The steps involved in the DMAIC process were: Define project goals and the current process. Measure key aspects of the current process and collect relevant data. Analyze the data to determine cause-and-effect relationships and ensure that all factors are being considered. Improve the process based upon data analysis. Control the process through the creation and implementation of a project control plan. Process capability was established by conducting pilot samples from the population. In the Define stage, the â€Å"Y† variable objective statement was established- Reduce the amount of time it takes for a failed part to go from point of failure to the hands of the evaluating engineer by 50%. Next, a data collection plan was formed. The data was collected using the McParts component tracking system. Reports were run on the data to monitor part progression. In the second stage, Measure stage, a process map was created which identified all the potential inputs that affected the key outputs of the process. It also allowed people to illustrate what happened in the process. This step was useful in clarifying the scope of the project. Once the process map was completed, a Cause Effect matrix was developed. The Cause Effect matrix fed off of the process map and key customer requirements were then identified. These requirements were rank ordered and assigned a priority factor to each output (on a 1 to 10 scale). The process steps and materials were identified and each step was evaluated based on the score it received. A low score indicated that the input variable had a smaller effect on the output variable. Conversely, a high score indicated that changes to the input variable greatly affected the output variable and needed to be monitored. The next step involved creating a Fault Tree Analysis (FTA). The FTA was used to help identify the root causes associated with particular failures. A measurement system analysis was then conducted. Measurement tools such as McParts software application program as well as handling processes were reviewed. Next, an initial capability study was conducted to determine the current processes capability. Next, a design of experiment was established. The design of experiment entailed capturing data at various times throughout the project. Six months of data was obtained prior to the start of the project to show the current status. Once the project was initiated, data was collected on a continuous basis. Finally, once the project was complete, data was collected to determine stability and control of the process. Once the experiment was completed and the data was analyzed, a control plan was created to reduce variation in the process and identify process ownership. All of the above steps included process stakeholders and team members whom assisted in creating each output. Data/Findings Define. The purpose of this project was to reduce the number of days it was taking a part to move from point of failure to the component engineer for evaluation. Through the use of historical data, 2 of the 17 destination location for parts were identified as being problematic. The average number of days it was taking parts to be delivered to the component engineer at the Fuels Systems Plant and Cummins Engine Plant (Emission Solutions) location was 137 days. Both sites were located in the same city where the part failures were identified. Key people involved in performing the various functions in part failures and delivery were identified and interviewed. Measure. A process map was created documenting each step in the process including the inputs and outputs of each process (Figure 1). Once the process was documented, the sample size was determined. Of the 3,000 plus parts, those parts delivered to the two sites were extrapolated, resulting in a sample size of 37 parts. Parts were then tracked using a controlled database called McParts. From this point, key steps identified were utilized in creating a Cause Effect matrix. The CE matrix prioritized input variables against customer requirements. The Cause Effect matrix was used to understand the relationships between key process inputs and outputs. The inputs were rated by the customer in order of importance. The top 4 inputs identified as having the largest impact on quality were: Incident (part failure) origination, appropriate tagging of parts, failed parts analyst role, and addressing the tag part to the correct destination. The Cause Effect matrix allowed the team to narrow down the list and weight the evaluation criteria. The team then did a Fault Tree Analysis (FTA) on possible solutions. The FTA analyzed the effects of failures. The critical Xs involved the amount of time for filing an incident report and tagging parts, the amount of time it takes for the FPA to pick up the parts from the t est cells once the part failure is identified, and the staging and receiving process. Next, validation of the measurement system was conducted. An expert and 2 operators were selected to run a total of 10 queries in the McParts database using random dates. The results of the 2 operators as shown in figure 2 was then scored against each other (attribute agreement analysis within appraisers) and that of the experts (appraiser versus standard) The next logical step was to determine if there was a difference between the types of test performed and the length of time it was taking a part to be delivered to the appropriate component engineer. There were two types of tests performed, Dyno and Field tests. Figure 6 shows the median for field tests was a little better than the Dyno tests which came as a surprise because field test failures occur out in the field and occur at various locations. The Dyno tests are conducted at the Technical Center. The data drove further investigation into the outliers which showed that out of approximately 25 of these data points 8 were ECMs, 5 were sensors, 7 were wiring harnesses, 1 was an injector, and 4 were fuel line failures. These findings were consistent with the box plot on days to close by group name. ECMs, sensors, wiring harnesses, and fuel lines have the highest variance. The similarities and differences in the parts were reviewed and it was discovered that they are handled by differ ent groups once they reached FSP. The Controls group handled ECM, Sensors, and Wiring Harnesses. The XPI group handled Accumulators, Fuel lines, Fuel pumps, and Injectors. Drilling down further, another box plot was created to graphically depict any differences in the two different tests for both sites. The boxplot then showed that CES dyno had a much higher median and higher variability than CESs field tests and Fuel Systems dyno and field tests. (See figure 7 below) An IMR chart was created for dyno field tests without special causes. The data was stable but not normal. A test of equal variances was run for CES and FSP dyno and field tests. Based on Moods Median there is no difference in medians. This was likely due to small sample size in 3 of the 4 categories; however CES dyno test had a lot of variation and would require further investigation. An IMR chart and box plot was run on the data for XPI and Controls group at the Fuel Systems Plant. The data was stable but not normal. Next, a test of equal variance was run which showed that the variances were not equal. Thus, the null hypothesis that the variability of the two groups was equal was rejected. Next, attention was directed towards the Fuel Systems Plant. A boxplot was created from the data which showed there was a statistical difference between medians for FSP Control group and XPI. Through the solutions derived from the DMAIC methodology of Six Sigma, the project team had performed statistical analysis which proved that there would be benefits obtained by resolving the problems that were identified. The changes were implemented and a final capability study was performed on the data which showed an 84% reduction in the number of days it took a part to move from point of failure to the hands of the component engineer for evaluation. Improvements were documented and val idated by the team. To ensure that the performance of the process would be continually measured and the process remained stable and in control, a control plan was created and approved by the process owner responsible for the process. Conclusions/ Recommendations The goal of this project was to reduce the number of days it was taking to move a part from point of failure to the component engineer for evaluation. This goal was accomplished and final capability of the process shows a reduction in time by 84% from 137 days to 22 days.There were 4 critical problems identified during this project whic

A Pair Of Silk Stockings Essay example -- essays research papers

Kate Chopin again writes another short story with a way of getting the attention of the reader in a short period of time. â€Å"A Pair of Silk Stockings† is based in early to mid 1900's in a average town. Shops, a theater and such lies in the center of town. The author tells of a widowed mother that is not so well off, that discovers a sum of money and is taken away in her own shopping spree and perhaps her own dreams.   Ã‚  Ã‚  Ã‚  Ã‚  Mrs. Sommers is a middle aged timid mother of a handful of children, and is apparently not well to do anymore after her husband’s death; Not that she probably ever was, but more so than her luck would have it now. She is small framed with tattered old clothes, as if she hasn’t been able to purchase anything in quite awhile, nor would she knowing how...

Compare and contrast shopping as a leisure activity of British Culture with that of your own culture Essay

Becoming a foreign student has given me the opportunity of living in two cities at the same time. Living in each city regularly has let me see many similarities and differences between both. In this essay, I will mainly compare and contrast shopping as a leisure activity between United Kingdom and Hong Kong. I will look at the kinds of activities, attitudes towards spending, the view of shops and the opening hours of shops. First of all, both United Kingdom and Hong Kong are consumer societies. People can find all sorts of things to do like shopping in malls or streets. The appearance of the malls in United Kingdom primarily comes from the fact that they feature more than hundreds of stand-alone shops, cafes, restaurants and a huge number of department stores, in which there are wide varieties of types of shops. Moreover, most shops are chain stores, but among those that are not, there is much individuality. (O’ Driscoll, J. 1995 P. 148) The situation of shopping malls is as common in Hong Kong. Both societies, moreover, like buying and selling products through online. Nowadays, the rapid development of the Internet advances the online trading. The customers do not need to walk on the streets, they just have to browse the website of that company and the shop will provide the pictures of the products for you to purchase. For example, the Amazon. com is popular in both United Kingdom and Hong Kong. (Hong Kong Tourism Board, 2012) Despite some important similarities in shopping between United Kingdom and Hong Kong, there are significant differences as well. One obvious difference is the attitude towards spending. The British are not very adventurous shoppers. They like reliability and buy goods that are preferably with the price clearly marked. Of course, they are not very keen on haggling over prices. (O’ Driscoll, J. 1995 P. 148) In contrast, Hong Kong People spend lots of money on buying things they like. Also, people in Hong Kong like to bargain with the sales owner in order to obtain a cheaper price, especially in some market streets and small shops. (Hong Kong Tourism Board, 2012) Other areas of difference are the opening hours of shops. Most shops close early in United Kingdom such as half-past five and shops close a bit later in large cities. In some towns there are even shops shut at midday and do not open again. (O’ Driscoll, J. 1995 P. 149) This is probably because owner needs to take rest after a full day’s work. However, since Hong Kong is a reputed shopping ‘paradise’, it is easy for you to find a shopping mall nearby anytime. (Hong Kong Tourism Board, 2012) Shops open till late at night in Hong Kong because workers tend to earn more money to earn a living and in order to match with those people who need to work late. Unexpectedly, some market streets even open at 2 am. Therefore, people can go shopping whenever they want to. To Hong Kong eyes, the shopping malls seem just like convenience stores. A final difference between United Kingdom and Hong Kong is the view of the shops. Many people are surprised by the shabbiness of shop-window displays, even in prosperous areas in United Kingdom. It is just that the British do not demand art in their shop windows (O’ Driscoll, J. 1995 P. 148), whereas shops in Hong Kong are definitely decorated nicely and drab hoardings and shop signs erupt in numerous shades of neon color. Peering over the balcony was like looking down on a fairground and even the lights of the shops could not compare with the overall view. People say shopping gives a lot of pleasure to citizens. This must be true. Indeed people in both United Kingdom and Hong Kong like to spend their leisure time on doing shopping. Yet there are still many differences based on the topics such as the spending attitudes, shops opening hours and the view of shops.

Ideal Student Essay

Quote: I realized that the only purpose to revolution is to be able to love who you want, how you want, when you want and where you want†¦ Idle student: An ideal student is someone who is thirsty for knowledge. Such a student will not be distracted in class. After all that is what every teacher desires. This thirst for knowledge will ensure that she is attentive and is committed to learn all that she can about a particular subject so that she can understand it fully. An ideal student will also have certain other distinguishing qualities. She will have well – defined goals in life and her effort will be to do whatever it takes to achieve these goals. For instance, if you ask her what she aspires to be, she will have a ready answer. And she will have a good reason for what she aspires to be. She will also have a clear vision of what is necessary to attain her goal. An ideal student will respect her teachers but will not be afraid of them. She will have the courage to admit her ignorance and ask for advice and direction if she needs it. She will not be the kind of person who accepts  things blindly and learns by rote. She will try to grasp concepts and if she finds it difficult, will have the confidence to approach her teachers for more information. She will be active in many things for she understands that one should have a well – rounded personality. She will have character more than anything else for it is character that makes a person’s destiny. She will compete only with herself and if someone seeks her help in class, will show no hesitation in giving it. An ideal student will observe discipline. She will be punctual and properly dressed. She will not absent herself from class for silly reasons and will do her homework daily. She will be neat and tidy and observe decorum in class. Children are the wealth of a nation. A Nation that produces a generation of talented and hardworking youth marches ahead on the path of progress. However creating quality citizens is no easy task and cannot be achieved overnight. The first step for that is to produce ideal students in our schools. These ideal students would go on to become ideal citizens. Who is an ideal student.? There isn’t one definite answer to that because there are many qualities that together define an ideal student. The most important quality of an ideal student is that for him. the foremost duty of his school life is to study. He studies regularly and works hard to improve his performance in each exam. But his objective of studying is not to only score good marks or secure a high rank. Beyond that he has a thirst for knowledge , an interest to learn more about everything he observes. Apart from studies, an ideal student actively gets involves in other activities. He is good in arts and sports and regularly participates in intra and inter school events. He is an active member of various clubs in the school and helps in organizing events. But participating in competitions and winning events is not the only big thing in life, and an ideal student knows that very well. Virtues like kindness, compassion,respect , sincerity, honesty, politeness are equally important in todays world, and these qualities are found in abundance in an ideal student. He treats his parents, teachers and elders with respect, and speaks politely to everybody. In times of crisis for his friends, he is the first person to stand by them. He never boasts of his achievements and never gets depressed by his failures. He is always cheerful and maintains a positive approach to life. He spreads hope and happiness wherever he goes. In short his conduct is admired by everyone. An ideal student is a voracious reader. He reads the newspaper regularly and is well aware about the events and happenings in various parts of the world. He also reads magazines, noels and short stories. he has an excellent grasp of the language and is very good at  communicating things to others. Last but not the least, an ideal student loves his parents and family members very much and does as much as he can to help them and to keep them happy. He never wastes his parents’ hard-earned money and believes that knowledge is the biggest wealth he can acquire. An ideal students grows up to be an asset to his family, his society and the country. If only all our schools couls produce more and more ideal students, our country could achieve tremendous progress and become the envy of the whole world..

Child Adoption In England And Finland Social Policy Essay Essays

Child Adoption In England And Finland Social Policy Essay Essays Child Adoption In England And Finland Social Policy Essay Essay Child Adoption In England And Finland Social Policy Essay Essay This essay attempts to light the differences and similarities in issues related to child acceptance in England and Finland while offering an scrutiny into the contexts in which societal workers and associated professionals have to work. While both England and Finland are provinces within the European Union ( EU ) , they demonstrate distinguishable and differing attacks to the acceptance of kids. In Finland along with other states in Scandinavia, kid acceptance and the lasting transportation of parental rights is less of a cardinal a concern, or worry than presently so in England where kid acceptance is featured conspicuously across a scope of professional, political and popular discourses. In footings of societal work pattern the engagement of kids and households, coupled with certain factors of the acceptance procedure have been handled in a clearly different manner between the two states. This can be seen where in Finland grownup adoptees were allowed to derive entree to records si ng their acceptance or their birth parents far earlier than their English opposite numbers where this was non allowable until much subsequently earlier through the Children Act 1975 ( Triseliotis, 1973, p. 1 ) . Harmonizing to Lowe ( 2000 ) in the late-nineteenth century efforts were made to present acceptance, but it was non until 1927, subsequent to the Adoption of Children Act 1926, that child acceptance became lawfully recognised in England. Since so many factors including ; studies, statute law and instance jurisprudence have all had an impact, this has resulted in refined policy and alterations in societal work pattern. More late media attending has illustrated societal workers alleged defects in relation to child acceptance procedures. In recent old ages, acceptance policy has been influenced by a figure of socio-cultural and political factors. During the Conservative authorities of the 1990s politicians and policy shapers made efforts inefficaciously to reconstitute what were viewed as unsatisfactory acceptance processs ( see PIU, 2000, p. 31 ) . These services were impaired because societal workers were driven by political rightness ( Hopton, 1997 ) . The white paper Adoption: The Future was published In November 1993, stand foring a common sense attack to acceptance ( Department of Health, 1993 ) . In 1996, the DoH published a Draft Bill with an accent placed on child acceptance as an option to individual parentage during the audience period. The Bill failed to come on any farther due to the General Election in May 1997. With a alteration in authorities, the so Prime Minister s ( Tony Blair ) Review of Adoption was published in 2000 ( PIU, 2000 ) . Followed by a White Paper, Adoption: A New Approach ( Departme nt of Health, 2000 ) , which was followed by the publication of the Adoption and Children Bill in 2001. The Bill failed to happen due to the General Election subsequently in the same twelvemonth. It was nevertheless re-introduced in October 2001 and the Adoption and Children Act received royal acquiescence in November 2002. The first Adoption of Children Act in Finland was in 1925, a twelvemonth earlier than the English equivalent. The present Finnish Adoption Act stems from 1985 followed by an extra Adoption opinion in 1997 which dealt specifically with acceptance guidance and inter-country acceptances. Specific to Finnish acceptance system is the function of Save the Children originally created in 1945 following the meeting of two old administrations ( Homes for Homeless Children which were practising acceptance since 1922 and Save Finland s Children, which was set up after the Second World War in an effort to assist orphaned kids ) . This administration is now portion of the International Save the Children. Salvage the Children has had an influential place as a supplier of acceptance services in Finland. In add-on to civic public assistance organic structures, Save the Children is still the lone private kid public assistance administration in Finland licensed to supply acceptance guidance ( Pylkkanen 1995 ) In Finland, acceptances have dramatically changed during the last 30 old ages, in 1970, 243 Finnish kids were adopted through Save the Children . Over the last few old ages this has decreased to less than 50. Partially as abortion became more freely available following the Abortion Act of 1970 ; the figure of unplanned kids born to immature individual female parents fell. ( Garrett, 2003 p.21 ) . England excessively has seen a lessening in acceptances, ( PIU, 2000, p.10 ) This may be attributed to the rise in usage of the preventive pill and the credence of individual female parents. Harmonizing to Lowe ( 2000 ) The largest diminution is in regard of babes ( kids under the age of 12 months ) put up for acceptance ; in 1968, 12,641 babes were adopted ( 51 % of all acceptances ) , but merely 195 babes were adopted in 1998 ( merely 4 % of all acceptances ) Harmonizing to Bennett ( 2009 ) Merely 4,637 kids were adopted in 2007, the lowest figure since 1999. In both provinces, acceptance is far more likely to affect kids in public care-or looked after kids ( In England under the Children Act 1989 ) who are older, are child protection concerns, or have disablements ( DoH, 1998 ) . This is in portion due to the fact that there are really few healthy babes available for acceptance. In England there are about 60,000 kids looked after . ( Department for Children, Schools and Families ( DCSF ) , 2007 ) . 62 % of these kids were removed, on a mandatory footing, from their household. Approximately 1 % of all kids under 18 old ages live in Foster attention, with approximately 48 % in household Foster attention, 40 % are in children s places , and the staying 12 % in new formats of household professional attention ( Kalland A ; Sinkkonen, 2001 ) . In July of this twelvemonth these statistics were even worse harmonizing to beginnings obtained by Bennett ( 2009 ) who claimed that this figure was now about three quarters of all acceptances, sh e agrees with the concluding behind the remotion of kids form their households saying The addition in intoxicant and drug maltreatment among parents is besides a turning factor in attention proceedings, with parents frequently being given several opportunities to interrupt their wont before kids are removed. It may perchance be argued that many of those kids in long-run arrangements should and likely could be adopted, but this is non the overruling position of Finnish society, so the dominant position is that of household saving. Several subscribers portion the sentiment that kids s best involvements are met when every attempt is made to maintain the household together. If surrogate attention is needed, it should ever be of limited continuance ( Garrett, 2003 ) . These positions echo FOX HARDING CHECK WHICH PERSPECTIVE AND MENTION Many of these Finnish kids in long-run Foster attention could hold been adopted if they lived in England. Obviously, foster attention makes it possible for kids to maintain some contact with their birth household. Unfortunately, this is non ever advantageous for the kid because of the terrible troubles including both psychological and behavioural of some parents ( Quinton et al. , 1997 ) . The arrangement faces the hazard of dislocation where the birth parents have sufficiently dealt or recovered from their troubles, and desire to be a complete household with the return of their kid. This may be successful, but may besides be ephemeral ensuing in eternal short-run arrangements. This will hold an inauspicious consequence destructing the kid s ability to organize any meaningful fond regards in maturity. Adoption would offer the kid an chance to organize a stable relationship but this would cut the connexions with the birth household. In Finland acceptance against the will of the natura l parents is far from the norm. As a consequence, there are really few contested acceptances. Harmonizing to the Finnish Adoption Act, the consent of both biological parents is needed before the acceptance can take topographic point. It should be noted that there are two exclusions to this ; foremost, acceptance can be granted if it is believed that the acceptance is decidedly in the best involvements of the kid and the refusal of consent of the parents is non appropriately justified, secondly, the parents can non logically show their will due to illness or disablement, or if their whereabouts are unknown. Additionally the female parent s consent is merely accepted after she has recovered from the birth ( no earlier than eight hebdomads ) . In Finland the feelings and desires of the kid are taken into history, this is harmonizing to the age and degree of adulthood. If the kid is 12 or older, their sentiments must be taken into history. In recent old ages England has evolved a grade of openness in the acceptance procedure ( DoH, 1999, Ch. 5 ) . This is because traditionally in England, the acceptance of kids resulted in the cutting off of the relationship with the birth female parent and birth household. The developments in this country have been provoked through professionals whose sentiment that openness is of import for the mental wellness and identity demands of adoptees ( Kirton, 2000, p. 108 ) . The ability for English adoptees and their household to derive entree to records is comparatively recent, in fact every bit recent as 1973 Scotland and Finland were the lone states in the Western universe where an adopted individual could obtain information from official records that could assist them follow their original parents Triseliotis ( 1973, p. 1 ) . The move off from high degrees of secretiveness can besides be attributed to adoptees who wanted to happen birth relations ( Campbell et al. , 1991 ) , birth female parents besides campaigned for larger degrees of openness in acceptance in England ( Logan, 1996 ) . These actions coupled with the Natural Parents Support Group , an administration of birth female parents, who lobbied the UK parliament for a public enquiry into the unfairnesss which occurred through the mass acceptance in the 1950s and 1960s ( Rickford, 2000, Fink, 2000 ) . The Children Act 1975 gave adopted people over the age of 18 old ages the right to use for entree to their original birth certifications. The recent openness has enabled in some cases, contact agreements between the kid and birth household after the acceptance has taken topographic point ( Lowe, 2000, p. 326-329 ) . The Adoption Act 1976 amended by the Children Act 1989, made it compulsory for the Registrar General to put up an Adoption Contact Register in an effort to do it possible for adoptive people to reach their birth parents and other birth relations. It the sentiment of Hughes A ; Logan ( 19 95 ) that these steps are in portion due to the increasing consciousness of the importance of post-adoption services. The position in Finland nevertheless has been far more unfastened so ; Salvage the Children has mediated between the adopted kid and biological parents since the 1960s. It should be mentioned that big proportions of adoptive people in Finland still do non wish to seek contact with their original households, normally those that felt letdown about being adopted inn the first case ( Garrett 2003 ) . This all means that while the recent thrust toward acceptance being more open is evidently of import, it must be recognised that openness is non simple or straightforward. Kalland et Al. ( 2001 ) shows that mortality rates in Finland for both sexes on the child public assistance register are in extra compared with the general population. Another Finnish survey showed aggressive behavior, delinquency and attending jobs were associated with kids and striplings in kids s places and that kids may besides be at hazard of sexual maltreatment in these places with the individual responsible for the act frequently being an older stripling ( Hukkanen et al. , 1999 ) . What is of import though is, none of these negative cases can be wholly attributed to hapless quality or damaging attention that kids get whilst in public attention. Numerous kids arrive in these establishments already enduring from been extremely traumatised in some instances due to parental dependences. In short, it is non merely the looked-after experience which leads to hapless results. Whereas in contrast concerns about the poor results of kids who are looked after ( Parker et al. , 1991 ) in England such as ; uneffective wellness proviso available for looked after kids ( Butler A ; Payne, 1997 ) , hapless degrees of educational accomplishment ( Aldgate et al. , 1993, Fletcher-Campbell, 1998 ) , the intimidation that takes topographic point in care scenes, the high gestation rates amongst adolescents in care in 2007 there were 360 female parents aged 12 and over who were looked after , an addition of 15 per cent from the old twelvemonth, ( Corlyn A ; McGuire, 1998, DCSF, 2007 ) , the disappointingly high figure of moves from care environment to care environment ( Sone, 1997 ) , and the deficiency of readying for those leaving attention , and hapless after-care support ( Biehal et al. , 1995 ) has led to the English acceptance system doing sweeping reform In July 2000 the so Prime Minister, Tony Blair published the authoritiess Review of Adoption which contained over 80 recommendations. Four of these recommendations focused on programs to ; develop and implement a National Adoption Register , pulling up of new National Standards for local governments to follow, the puting up of an Adoption and Permanency Taskforce to advance best pattern and challenge hapless public presentation, and carry oning a rapid examination of the backlog of kids that were waiting to be adopted ( PIU, 2000, p.4 ) .This was followed in December 2000, with the White Paper, Adoption-A New Approach . The purpose of set uping a National Adoption Register and an Adoption and Permanency Taskforce were once more set out. A national mark was to be set with the purpose of increasing the figure of looked after kids adopted. Other procedures highlighted in the audience paper integrated within the program were to present new National Standards for councils and acceptance bureaus. To implement these criterions, powers were put in topographic point emergency reviews and special steps to cover with debatable service suppliers. Other programs included, timescales for kids enabling a sound program for their lasting hereafter, this would be made within six months of their starting to be continuously looked after. When the determination was made that acceptance was to take topographic point, a new household should be found within a farther six months. In an effort to help adoptive parents new programs to back up them were briefly set out. Other important steps included: a new legislative option, called special care , this would supply a sense of stableness for the kid, but fall short of legal separation from their birth parents. Unlike England there is no National Adoption Register and there are no programs to develop and implement one in Finland, a National Register nevertheless, could perchance assist in progressing research and pattern in a Finnish model. Likewise an Adoption and Permanency Taskforce similar to that of England would be welcomed by many in Finland. Finland s parliament nevertheless, have this twelvemonth voted to give people in same-sex twosomes who are registered in an official partnership the legal right to follow the naturally-born kid of their spouse. ( Finnsson, 2009 ) No farther programs to rush up acceptances of looked after kids are planned. This is, possibly, because as suggested earlier of the dominant place Fox Harding once more which places an accent on household saving services. There are really few Finnish waiting to be adopted. There are nevertheless in contrast, 100s of twosomes waiting to follow a kid. There has been some treatment in the media about the intense defeat of these twosomes. It may take four or five old ages to hold a kid adopted. This has raised the impression of an acceptance industry which is fed by the kid protection system, Unfortunately, in many instances, the accent has changed from the desire to supply a destitute kid with a place to that of supplying a destitute parent with a kid. As a c onsequence, a whole industry has grown, bring forthing 1000000s of dollars of grosss each twelvemonth, seeking babes for acceptance and bear downing prospective parents tremendous fees to treat paperwork. ( Pragnell, 2008 ) It is besides his position that the involvements of the kid are now the cause of atrociousnesss committed against kids and parents by unthreatening and well-meaning employees of province and related bureaus but whose Acts of the Apostless are taking to immense enduring for kids.

Ethics Critique Essay Example | Topics and Well Written Essays - 1000 words - 1

Ethics Critique - Essay Example According to psychological research, moral judgments are shaped by the human mind and behavior (Ross, et al.345). On the same note, moral judgments are influenced by what a person perceives to be right or wrong. In this respect, the issues of ethics moral, norms, and ethics emerge. These three issues vary from one person to another for differentiated reasons, among them individual growth and development, cultural effects, and the impact of the society on an individual. Therefore, based on the work of the mind and the underlying human behavior, a person can make moral judgments that do not necessarily match those that might be made by another person. Psychological research essentially explains how human beings make moral judgments, based on the human mind and behavior (Ross, et al.358). The right or wrong factor at an individual level is accounted for, alongside virtues and ethics that are also based on the human mind and behavior. The link between all the aforementioned variables can help in explaining the thoughts, judgments, or actions that an individual, or society for that matter, undertakes regarding any given situation or condition. In this respect, judgments or actions by human beings can be justified through psychological research. In understanding how human beings act, feel, and think prior to making moral judgments, psychological research factors in a number of variables that influence the whole process. To start with, human beings must be aware of some given form of morals in order to enable them make moral judgments. In other words, they must be in a good position to distinguish between right and wrong. This aspect is shaped by the environment, behavior, culture, and society among other variables. Once the human being is potentially in a position to differentiate right and wrong, the issue of moral

In depth research on the difference berween Slow cooking and Fast Essay

In depth research on the difference berween Slow cooking and Fast cooking as applies to modern standards in today's industry - Essay Example A nation’s diet reveals more about its culture and values than its art or literature (Schlosser, 2002). According to Belanger (1998), the attitude towards fast food mirrors the American society: â€Å"industrialized, impersonal, dominated by big business, advertising driven, hectic, anti-environmental, and not very satisfying.† In today’s hectic world, where there is simply no time for relaxation and pleasure and the society is driven by convenience and speed, fast food seems to be the answer. Fast food requires no grocery shopping or cooking, thereby saving the labor required to do both. The slow food movement directly opposes every concept that fast food represents – blandness, uniformity, conformity and the blind worship of science and technology (Krummer, 2002). In his article, Vinci (2007) propagates the concept of slow food as eating healthily and responsibly. Although critics of slow food claim that it is elitist and unaffordable by ordinary people, Kummer uses a different range of adjectives to describe the same. According to him, they are mainly peasant foods that have been prepared the same way for centuries. They are time-tested and spring directly from regional cultures and cuisines (2002, p.12). The affinity towards industrial standardization and mass production is another reason for the increasing popularity of fast food. Fast food stems from an entirely different sort of mass culture and mass production, says Krummer (2002). One Taste Worldwide, the slogan of one of the largest fast food chains, McDonalds, perfectly sums up the homogenizing and standardizing effect that seems to have captured the taste buds of many. Savoring genuine tastes together with saving the environment is the new trend that is taking the world by storm, declares Vinci (2007). The slow food brigade is also spreading the message that food should not only be tasty but also nutritious and healthy, which